how to hang a tapestry without nails

zarin42762 April 27, 2023 Comment

Expert advice from Bob Vila, the most trusted name in home improvement, home remodeling, home repair, and DIY. Tried, True, Trustworthy Home Advice

How To Hang a TapestryTapestries bring color and texture to any wall, but you have to know how to hang a tapestry right for the full effect.

Wallpaper, painting, or stencils may not be your thing, or you might want to decorate your walls with deeper, richer hues and patterns. A tapestry might be the answer to just such a decor dilemma. These traditional textiles instantly add texture, color, and pattern to a space, but there’s more than one way to display them. Take a look at how to hang a tapestry, and pick a method that works for the given space. The tapestry can then set the room’s mood.

Ways To Hang A Tapestry At Home... A How To

Take note of the tapestry fabric. A tight weave may get holes if punctured by nails or pushpins, while a thin weave lets them through without a problem. If you want to prevent fading, don’t hang a tapestry in direct sunlight. Over time, that sunlight can bleach the fabric of its colors.

A curtain rod pushed through the rod pocket on the back of a tapestry provides a strong, stable way to display textile artwork. It also protects the fabric from holes. (Note: Not all tapestries have a rod pocket, but keep reading for a way to circumvent this problem.)

Measure the tapestry. The curtain rod should be four to eight inches longer than the width of the tapestry, depending on the rod design. Check the rod’s length range, which is generally listed in the description. The tapestry width should fall within that range. For example, a 30-inch tapestry would fit a curtain rod that adjusts from 28 to 48 inches.

M 6m 10meters Star String Lights For Wall Hanging Tapestry Accessories Non Trace Nail / Hanging Clamp / 3m Stick|decorative Tapestries|

The tapestry should have a little clearance on each end but not much. Two or three inches on each side should do. Keep in mind that if the rod has finials or other decorative end caps, the rod measurement only includes the length of the rod that actually holds the tapestry. Make sure there’s space on the wall for the end caps.

Gently slide the curtain rod through the rod pocket. Antique or delicate fabrics require a gentle hand with this step. Too much tugging and pulling can damage the fabric, especially if it gets snagged on the rod.

Depending on the fabric type, you may want to steam or iron the tapestry before putting it on the rod. If you’re unsure of the fabric’s content, stay on the safe side and steam it rather than using an iron.

Amazon.com: Procida American Flag Tapestry Wall Hanging Vintage Retro Stars And Stripes Usa Flag Tapestry Wall Tapestry For Dorm Bedroom Living Room College, Nail Included, 60\\

Curtain rods hang differently depending on their design. Check the packaging to determine what tools you may need. Common tools for hanging curtain rods include a stud finder, screwdriver, level, or hammer.

Heavy tapestries will need the added stability of a stud to act as an anchor for the screws and brackets. If there’s not a stud in the right location, a wall anchor can add stability. Measure from the ceiling to each bracket to make sure they’re level. Check the measurements and markings with a level to make sure the rod will hang straight. Attach the brackets according to the directions.

Once the brackets are in, there’s not much left to do but hang the tapestry. The rod should rest on the two brackets, hiding them from view. The finials or end caps typically attach after the rod (and tapestry) is in place.

How To Hang A Tapestry 8 Different Ways

Pro Tip: If the tapestry doesn’t have a rod pocket, use curtain clips to attach the tapestry to the rod. Large square or rectangular tapestries can drape over the rod as an alternative hanging method.

Nails, pushpins, and tacks are a simple hanging solution for tapestries that aren’t too large or heavy. They also work better for looser weaves because the nails or pins fit through the weave without damaging the fabric. You can adjust the tapestry’s drape by adding more nails or pushpins—more space between the nails creates a casual drape, while less space looks more formal.

No matter how many nails or pushpins are used, they should be equally spaced. You’ll probably need a helper for larger tapestries. Hold one corner while placing the first corner pin. Use a hammer if you can’t get the pushpins in by hand or if you’re using nails.

Trippy Tapestries Butterflies For Wall Art Mandala Tapestry

Support the center of the tapestry while placing the second pin or nail in the other corner. For a small tapestry, you may not need more than these two pins.

Large tapestries typically take more than two pins. Once you’ve placed the two corner pins, use a measuring tape to find the center of the tapestry and place a pin in this location. Measure from the center pin to one of the corner pins. Divide this number to determine the center of this measurement and place a pin there.

Repeat this process (measuring between two pins and finding the center) until you’ve installed as many pins as the tapestry needs for adequate support.

Hang Tapestries And Carpets

If you’re wondering how to hang a tapestry without a rod or how to hang a tapestry without putting holes in the wall, Command strips or Velcro are excellent options. These methods offer a clean appearance and don’t put holes in walls. They’re a particularly good option for renters or for hanging tapestries on curved walls.

Command strips and Velcro both require adhesive to hold the tapestry to the wall. The adhesive may come off in the presence of humidity or too much heat. Consequently, the tapestry should not hang in kitchens, bathrooms, and near heating vents. Direct sunlight may also cause the adhesive to peel off the wall.

Prepare the wall by wiping it down with a damp cloth. This removes any dirt or dust that could weaken the adhesive’s hold. Let the wall dry completely before applying the adhesive.

How To Hang Up Tapestry Without Holes?

Measure from the ceiling to the hanging point and make light marks where each corner of the tapestry will hang. Draw a light line between these two points. Use a level to make sure the tapestry will hang straight along this line. It’s easier to make adjustments at this point than after the tapestry has been hung on the wall.

Follow the directions on the Command strips to apply them to the tapestry. That typically includes peeling off one side of the backing and pressing the command strip sticky side down onto the tapestry.

You’ll need strips at each corner and equally spaced along the top of the tapestry. The larger and heavier the tapestry, the more strips you’ll need. You can also apply Command strips or Velcro to the bottom of the tapestry so that it lies flat against the wall.

Skillful Ways To Hang Any Blanket On A Wall

Remove the remaining backing from the Command strips, and line up the strips with the pencil line drawn on the wall. Press on each strip in place to strengthen the hold. Do the same for the strips on the bottom edge of the tapestry.We independently select these products—if you buy from one of our links, we may earn a commission. All prices were accurate at the time of publishing.

Let’s talk tapestries. They’re the perfect solution for that big empty wall, for helping sound proof thin walls, for replacing headboards when headboards aren’t an option, and they’re typically pretty renter-friendly art. Most can be hung with a simple dowel rod and a nail or two. Maybe you just inherited a piece from your grandmother, or stumbled upon a brilliantly patterned textile at the flea market, or maybe you made your own wall hanging. Either way, you’ll probably need to hang it. Here are a few easy ways to get that beautiful masterpiece up on the wall for all the world (or at least your houseguests) to see.

Create a “clamp” with wood (above). If you have a table saw (or a Home Depot nearby) you can create a beautiful custom clamp from Nalle’s Home for your tapestry. All you need is 4 wood slats, hot glue, pan head screws, and string to hang.

How To Display (most) Textiles Without Damage, Part 1

Use a curtain rod and hooks. Society6 shows a very simple way to display your hanging by attaching a curtain rod to the wall, cutting small holes along the top of the fabric and hanging from shower curtain hooks. If you don’t want to cut your tapestry, bulldog clips are also a great option.

Use a dowel and fusible bonding. This no-sew option from Lucy Akins shouldn’t take much time, and it limits the amount of wall damage (only one nail or screw hole required!). Use a fusible fabric bonding agent to create a pocket for a dowel rod, and then finish off by screwing an eye hook to either end to attach your string or rope. If the tapestry is heavy, you can trade in a nail or screw for a more substantial wall anchor.

Make a wooden wall mount. Cut a piece of wood to size, stain it to your heart’s desire, and easily attach using a staple gun. See exactly how Naomi crafted hers, and then get started on your own.